PassMyTest

CDL Combination Vehicles Practice Test

Practice for the Class A combination vehicles knowledge test: rollovers, rearward amplification, trailer skids, off-tracking, combination air brakes, coupling and uncoupling.

Loading your test…

Who needs the combination vehicles test?

You need it for a Class A CDL, which covers tractor-trailers and other combinations with a gross combination weight rating of 26,001 pounds or more when the towed unit is over 10,000 pounds. The test usually has 20 questions and requires 80% to pass.

What the test covers

The combination test assumes you understand air brakes, so also take our air brakes practice test.

All 22 questions and answers

Take the test first, then open the list to review every question with its answer.

Show all 22 questions and answers
  1. A fully loaded tractor-trailer is about how many times more likely to roll over in a crash than an empty one?Answer: 10 timesFully loaded rigs are about 10 times more likely to roll over in a crash than empty rigs. Keep the load low and take turns slowly.
  2. To help prevent a rollover, you should:Answer: Keep the cargo as close to the ground as possible and go slowly around turnsRollovers happen when you turn too fast. Keep the center of gravity low and slow down for turns, on-ramps and off-ramps.
  3. What is "rearward amplification"?Answer: The crack-the-whip effect that makes the rear of the rig swing more than the tractor in a quick lane changeQuick steering moves are amplified toward the rear of a combination vehicle, which can roll the trailer over. The last trailer swings the most.
  4. To avoid trailer swing and rollovers, how should you steer a combination vehicle?Answer: Gently and smoothlyLook far enough ahead to avoid surprises so you never need sudden steering moves. Steer gently and smoothly.
  5. Which of these may take the longest to stop?Answer: A bobtail tractor (a tractor without a trailer)Empty trucks and bobtail tractors have stiff suspension and poor traction, so their wheels lock up easily. A bobtail tractor can take longer to stop than a tractor-semitrailer loaded to maximum gross weight.
  6. If the trailer wheels lock up and the trailer starts to swing out, you should:Answer: Release the brakes to get traction backLocked trailer wheels lose traction and the trailer swings around (trailer jackknife). Release the brakes so the wheels can grip again. Never use the trailer hand brake to straighten the rig.
  7. How can you spot a trailer skid early?Answer: By checking the trailer in your mirrors whenever you brake hardThe earlier you see the trailer begin to swing, the easier it is to correct. Check your mirrors whenever you brake hard.
  8. When a combination vehicle turns, the rear wheels:Answer: Follow a shorter path than the front wheels (off-tracking)This is off-tracking. The rear wheels cut inside the path of the front wheels, and the longer the vehicle, the bigger the difference.
  9. When making a right turn in a combination vehicle, you should:Answer: Keep the rear close to the curb and turn wide as you complete the turnSwinging left first invites drivers to pass on your right. Keep the rear of the vehicle close to the curb and turn wide as you finish the turn.
  10. Which units are most likely to get stuck on a raised railroad crossing?Answer: Low-slung units such as lowboys, car carriers and moving vansLow-clearance units can hang up on raised crossings. If you ever get stuck, get out and away from the tracks and call for help.
  11. What does the tractor protection valve do?Answer: Keeps air in the tractor brake system if the trailer breaks away or develops a bad leakIt closes to protect the tractor air supply if the trailer breaks away or has a bad leak. The trailer air supply control in the cab operates it.
  12. The trailer air supply control (usually a red, eight-sided knob) should pop out when air pressure falls to about:Answer: 20 to 45 psiIn the 20 to 45 psi range the control pops out, closing the tractor protection valve and applying the trailer emergency brakes.
  13. Why should you never use the trailer hand valve (trolley valve) to park?Answer: Air can leak away and release the brakesIf the air leaks away, trailers without spring brakes will roll. Always use the parking brakes to park, and use the hand valve only to test the trailer brakes.
  14. How are the emergency (supply) and service (control) air lines usually color coded?Answer: Red for emergency, blue for serviceGlad hands and lines are often color coded: red for the emergency (supply) line and blue for the service (control) line.
  15. What happens if the emergency (supply) line breaks or the trailer breaks away?Answer: The trailer emergency brakes come onLosing pressure in the emergency line makes the trailer emergency brakes come on, and the tractor protection valve closes to save the tractor’s air.
  16. If you cross the air lines when coupling to an older trailer without spring brakes, you could:Answer: Drive away without any trailer brakesSupply air would go into the service line instead of the emergency line. That is why you test the trailer brakes before driving.
  17. When you back under a trailer, the trailer should be:Answer: Low enough that it is raised slightly when the tractor backs under itA trailer that is too high may not couple correctly; one that is too low can be hit by the tractor. It should be lifted slightly by the fifth wheel.
  18. After coupling, the fifth wheel locking jaws must be closed around:Answer: The shank of the kingpinGet out and look: there should be no space between the upper and lower fifth wheel, the jaws must close around the kingpin shank, and the locking lever must be locked.
  19. How do you check the coupling after hooking up?Answer: Pull forward gently in low gear with the trailer brakes locked (tug test)With the trailer brakes on, pull gently against the trailer in low gear to make sure it is locked to the tractor. Then check visually.
  20. Before driving away after coupling, the trailer landing gear must be:Answer: Fully raised with the crank handle securedLanding gear left partly down can catch on railroad tracks or other objects. Raise it all the way and secure the handle.
  21. Before uncoupling, you should park the rig:Answer: In a straight line on firm, level groundParking in a straight line prevents damage to the landing gear and makes recoupling easier. The ground must be firm enough to support the trailer.
  22. How do you test the trailer emergency brakes?Answer: Charge the trailer air system, pull out the trailer air supply control, then pull forward slowly; the trailer should not moveWith the trailer air supply control in the emergency position, the trailer emergency brakes should hold the trailer when you pull forward gently.

Frequently asked questions

How many questions are on the combination vehicles test?

Most states use 20 questions and require 80% (16 correct). Check your state’s CDL manual for the exact number.

Do I also need the air brakes test for a Class A CDL?

Almost all tractor-trailers have air brakes. If you do not pass the air brakes knowledge test, your CDL will carry an air brake restriction.